Firstly, you need to plan your work place; where are you going to work and store the car? Most vintage race car driver enthusiasts do their restoration project in their own garage since the car cannot be moved about during the restoration process. If you don’t have a garage, then check if you could do it in the driveway of your home. Check with your building code administrator to make sure this is allowed because in some neighborhoods; this is not allowed.
overhaul a care engine I am afraid I will waste my money. How do you replace this with confidence? First acknowledge the concern (fear). Let them know you understand that many companies have a natural fear that SEO won’t work, and it will be a waste of money. And of course ask them if they feel this way.
If the engine has good compression but is hard starting usually what you have is a faulty carburetor or loose intake manifold. The vacuum leak caused by the loose intake manifold will cause the engine to only start when the choke is engaged. Tighten the intake manifold bolts.
rebuild a car engine A car that uses less gasoline in a clean engine means what? Cleaner exhaust emissions. The fact is that burning hydrogen result in only one by-product: water. No pollution at all. Reducing the gasoline consumption results in less exhaust fumes, cleaner engine result in cleaner exhaust fumes. Running my car with water using HHO fuel cell technology would have a great impact on my environment.
Buy the Haynes Manual for your car – These manuals are car specific and have detailed information as well as pictures to help you. This will be one of the most valuable tools you have the deeper you delve into the project.
So in order to build a car engine that uses water to increase the mileage per gallon (MPG) of gasoline, you would need to construct a hydrogen generator kit or fuel cell to be attached to the motor.
One very important area to look at is the fuel lines for the engine. Kombis do burn, and it’s caused by petrol spraying all over the engine. Check the fuel lines carefully and if they look old and cracked replace them with quality fuel line. Make sure that they are not rubbing on the tinware and that the pipes going into the carby and fuel pump are not loose. This is important!
The manufacturer’s directions have to be followed for testing, repairing or replacement of components. Sometimes, a system can be simply fixed by tracing down all the wires and hoses.